JewelLoop · Gem identification helper
https://jewelloop.net/tools/gem-identification-helper/
Estimates for guidance; verify before production.
Gem identification helper
Enter what you measured on the refractometer, polariscope and hydrostatic balance, and see which gems and common imitations fit the readings.
Your last values are back. They are kept in this browser only.
Possible matches
–
Enter at least one reading.
Synthetic versions (for example synthetic ruby, spinel or emerald) have the same RI and SG as the natural gem, and treatments do not change them. Only a laboratory can say whether a stone is natural, synthetic or treated.
Estimates for guidance; verify before production.
Understand the result
What this helper can and cannot do
It compares your readings with the published refractive index, specific gravity and optic character of 31 gems and seven common imitations, and lists everything that fits. It narrows the possibilities; it does not identify a stone. Synthetic gems have the same readings as natural ones, and treatments do not change them, so only a laboratory can say whether a stone is natural, synthetic or treated.
Getting good readings
Take several refractometer readings while turning the stone, and note the lowest and highest. A standard refractometer cannot read above about 1.79 to 1.81: diamond, zircon, demantoid and most diamond imitations show as over the limit. Specific gravity needs a loose stone, ideally over one carat.
Sources
Gem values: the JewelLoop gemstone reference table (GIA Gem Encyclopedia and Gem Reference Guide; Gem-A). Imitations and optic character: GIA Gem Reference Guide; Read, Gemmology, 3rd edition.